A vapour control layer provides a method of meeting the mandatory requirements for the control of condensation, set out in BS 5250 Code of Practice for control of condensation in buildings. It can significantly contribute to the control of air leakage, an important factor under the Building Regulations document Part L (England & Wales) and the SBSA guidelines (Scotland). Sika Limited provides a variety of vapour control layers, selected to suit a wide range of applications.

S-Vap 7000 E DP

S-Vap 7000 E DP is a multi-layer self-adhesive vapour control layer and carrier membrane made of polymer modified bitumen with a glass-fibre mat reinforcement and aluminium foil which is laminated with a grey polyester film as a top surface, used within the Sika Liquid Plastics built up roof system.

 

DOWNLOAD

Product Data Sheet | Declaration of Performance

S-Vap 500E

S-Vap 500E is an unsupported vapour control layer based on PE-reclaim used within a mechanically fixed built up roof system.


DOWNLOAD

Product Data Sheet | Declaration of Performance

Relevant primer for sheet products

Primer 610 Spray

Primer-610 Spray has been specifically developed to provide the necessary preparation to certain substrates and ensure the adhesion S-Vap 7000 E DP to Decotherm and various substrates.

 

The spray application significantly improves the speed of application by up to 75% and it dries in matter of a few minutes. The quick and easy spray application method will help speed up the installation of Sika Liquid Plastics Built Up Roof System, saving time and money.

 

DOWNLOAD

Product Data Sheet | Safety Data Sheet