The mandatory requirement for the thermal efficiency of buildings is set out in “The Building Regulations Approved Documents” - Part L for England and Wales, Part F in Northern Ireland and in Section 6 of the SBSA Technical Handbooks for Scotland.

 

Sika Liquid Plastics range of products are suitable for use in adhered, mechanically fastened, inverted, ballasted and green roof applications that have been tested for compatibility with other Sika Liquid Plastics roofing components. They meet a wide variety of fire resistance, acoustic and design requirements.

Decotherm

Decotherm® Insulation is faced on both sides with a wet lay coated glass fibre tissue autohesively bonded to the insulation core during manufacture.

 

The core of Decotherm® Insulation is a high performance CFC / HCFC – free rigid polyisocyanurate (PIR) insulant. It is available as flat board or tapered for those that require improved falls.

 

DOWNLOADS

Product Data Sheet

Decotherm HD

Decotherm® HD Insulation is a high compressive strength insulation cover board which helps to resist damage from foot traffic and heavy loads, and is suitable for use on flat roofs waterproofed with cold liquid applied waterproofing.

Decotherm® HD comprises of a high performance rigid thermoset polyisocyanurate (PIR) fibre free insulation core, manufactured with a coated glass tissue based facing, autohesively bonded to the insulation core during manufacture.

Manufactured with a blowing agent that has zero ODP and low GDP.

 

DOWNLOAD

Product Data Sheet

Decotherm Optim R

Decotherm® Optim-R™ is a next generation insulation solution that comprises of rigid vacuum insulated panels (VIP) with a micro-porous core which is evacuated, encased and sealed in a thin gas tight envelope, giving outstanding thermal conductivity, the the thinnest possible solution.

Decotherm® Optim-R™ is an insulation system consisting on a rubber crumb mat (R3), a vacuum insulated panel (Optim-R™ VIP Panel) and a rigid thermoset insulation (Decotherm®).

 

DOWNLOAD

Product Data Sheet

Eco Inverted Roof Board

Sika Liquid Plastics Eco Inverted Roof Board is a high performance rigid extruded polystyrene insulant with a smooth, dense skin on both faces. Eco Inverted Roof Board is manufactured using CO2 as the blowing agent and has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP).

 

DOWNLOAD

Product Data Sheet

CEM Topped Board

Sika Liquid Plastics Cem-topped Board is a high performance rigid extruded polystyrene insulation with 10mm thick polymer fibre reinforced hydraulic cement.

 

DOWNLOAD

Product Data Sheet